Battery Development And Deployment
Electrification is the process of powering by electricity and, in many contexts, the introduction of such power by changing over from an earlier power source.
REVAMPs training material is split into 4 distinct modules under the Title of Battery Development and Deployment. REVAMP recommend its clients to undertake all 4 modules in sequence, but courses can be organised to meet individual clients’ requirements. These modules are bespoke non-accredited continuous professional development (CPD) courses.
All of the courses below are provided by REVAMP Training Limited from its base at Calvary House Middlesbrough. Should a client wish for REVAMP Training Limited to undertake training at its premises, this can be undertaken with prior agreement. All prices available upon request via:
[email protected] or by contacting +44 1642 220 778.
Module 1: Battery Technology Fundamentals
Basics of battery knowledge.
Understand the battery cell, its development, architecture and operation.
Battery cell configurations.
Battery cell matching.
Battery Specifications and their significance.
Battery Management System.
Module 2: Lithium-Ion Battery Manufacture and Energy Storage
Unit 1, Identify and describe the fundamental stages of Li-ion battery cell Electrode, Assembly, Formation, Ageing and Testing and Finishing.
Unit 2, Provide an understanding of the principles, types and benefits of Li-ion Battery Rechargeable Energy Storage Systems (RESS).
Module 3: Lithium-Ion Battery Health and Safety
Unit 1, Electrical Safety, Law and Definitions.
Unit 2, Electrical Hazards, Safety and Shock.
Unit 3, Hazard Management.
Unit 4, Safe Working Practices.
Unit 5, Battery Lock Out.
Unit 6, Control of Substances Hazardous to Health (COSHH).
Unit 7, Electrolyte Safety and Associated Hazards
Unit 8, Manual Handling and Spill.
Unit 9, LOLER and PUWER Regulations.
Unit 10, ATEX and DSEAR.
Unit 11, Battery LOTO.
Module 4: Battery Recycling and Repurposing
Battery end of life (EV).
Transport, Discharge and Dismantle.
Battery Shredding.
Electrolyte Treatment.
Material Separation.
Gas Scrubbing.
Hydromet Recovery.
REVAMPs training material is split into 4 distinct modules under the Title of Battery Development and Deployment. REVAMP recommend its clients to undertake all 4 modules in sequence, but courses can be organised to meet individual clients’ requirements. These modules are bespoke non-accredited continuous professional development (CPD) courses.
All of the courses below are provided by REVAMP Training Limited from its base at Calvary House Middlesbrough. Should a client wish for REVAMP Training Limited to undertake training at its premises, this can be undertaken with prior agreement. All prices available upon request via:
[email protected] or by contacting +44 1642 220 778.
Module 1: Battery Technology Fundamentals
Basics of battery knowledge.
Understand the battery cell, its development, architecture and operation.
Battery cell configurations.
Battery cell matching.
Battery Specifications and their significance.
Battery Management System.
Module 2: Lithium-Ion Battery Manufacture and Energy Storage
Unit 1, Identify and describe the fundamental stages of Li-ion battery cell Electrode, Assembly, Formation, Ageing and Testing and Finishing.
Unit 2, Provide an understanding of the principles, types and benefits of Li-ion Battery Rechargeable Energy Storage Systems (RESS).
Module 3: Lithium-Ion Battery Health and Safety
Unit 1, Electrical Safety, Law and Definitions.
Unit 2, Electrical Hazards, Safety and Shock.
Unit 3, Hazard Management.
Unit 4, Safe Working Practices.
Unit 5, Battery Lock Out.
Unit 6, Control of Substances Hazardous to Health (COSHH).
Unit 7, Electrolyte Safety and Associated Hazards
Unit 8, Manual Handling and Spill.
Unit 9, LOLER and PUWER Regulations.
Unit 10, ATEX and DSEAR.
Unit 11, Battery LOTO.
Module 4: Battery Recycling and Repurposing
Battery end of life (EV).
Transport, Discharge and Dismantle.
Battery Shredding.
Electrolyte Treatment.
Material Separation.
Gas Scrubbing.
Hydromet Recovery.
